|
Blue
Sky Aviation
offers a ceramic coating service. The product we use is a truly
amazing clear coating that is almost impregnable. Corrosion tests
on aircraft aluminum have been done in the Great Salt Lake. Tests
prove that it resists blowtorch heat (yes, blowtorch flame) above
2000°F. It is impervious to virtually any chemical. It's excellent
for hardness, flexibility, impact and scratch resistance, adhesion,
and corrosion protection. It is unbelievably slick.
Applied to a
prop, this incredible film sheds bugs, pebbles, salt spray, and
more, highly recommended on amphibious aircraft. On an exhaust,
it seals the metal from corrosion and by refraction reduces heat
transmission to cowling and elsewhere. On leading edges, bugs slide
off. Over the entire plane, the slick surface fortifies the boundary
layer and reduces drag.
|
Characteristics:
- Excellent
hardness
- Excellent
flexibility
- Excellent
impact resistance
- Excellent
adhesion, mar, and abrasion resistance
- Excellent
heat tolerance (2000°F)
- Excellent
chemical and solvent resistance
- Available
in satin or gloss finish
- Non-photochemical
reactive
|
Applications:
- Exhaust
- Bare
aluminum
- Leading
edges
- Props
- Floats
- Turbos
- Landing
Gear
- Any
place you would use Zink Chromate or other corrosion inhibiting
products.
- Chrome
|
|
Physical
Data :
- Liquid,
clear
- Specific
Gravity: >1
- Evaporation
Rate: Slower then ether
- VOC:
2.8 lb/gal; 336 gm/ltr
- % Solid
by weight: 25%
- % Solid
by volume: 22%
- Weight
per gallon: 8.34 lbs
- Flash
Point: 150 F CC Part A
- Flash
Point: 47 1/4 F CC Part B
|
Performance
Data :
- Salt
Spray: Excellent-Passed 500 hr test with no negative effects
- UV
Resistance: Excellent
- Solvent
Resistance: Excellent
- Flexibility:
Excellent
- Theoretical
Coverage at 0.1 mil: 3,572 square feet (1624 X 22% solids
by volume)
- Hardness:
6H-Excellent
|
|
Physical
Data :
- METALS:
Surface must be free of grease, oil, dirt, and other foreign
matter. Oxidation material must be removed.
- PLASTICS:
Surface must be free of grease, oil, dirt, and other foreign
matter.
- PAINTS:
Surface must be free of grease, oil, dirt, and other foreign
matter. Oxidation material must be removed.
- POWDERCOATING:
Surface must be free of grease, oil, dirt, and other foreign
matter. Oxidation material must be removed.
|
CAUTION:
Paint will not stick to this ceramic coating!
Toll
Free : 866-859-0390
E-mail:
info@blueskyaviation.net
|
Pricing
for exhaust systems
|
| Per
linear foot of exhaust 4.5" and less in diameter is $12.57. |
| For
cleaning a used exhaust, add $5.50
per linear foot. |
| We
have a special polishing service available. The minimum charge
is $110.00. |
|
NOTE:
All coating and curing is done below 150 F.
|
EVERSHIELD
TEST PERFORMANCE DATA
PRODUCT DESCRIPTION
AIRCRAFT FINISHING SYSTEMS
EVERSHIELD is a two-component, ceramic clearcoat/chemical treatment
system designed for Original Equipment Manufacturers (OEM) to protect
the substrate over which it is applied from corrosion and oxidation.
EVERSHIELD which applied properly, will not yellow, chip, crack,
or peel. If gouged or damaged, the finish will not experience creepage
and is repairable. EVERSHIELD is designed to coat surfaces that
require a durable, flexible, and solvent resistant thin coating
that is heat tolerant. EVERSHIELD offers excellent coverage, durability,
and corrosion protection as well as being a low VOC and EPA compliant
coating. EVERSHIELD is applied clear and will dry clear.
TESTING
Test results were compiled
from 4 different sources. Tests were performed applying AFS EVERSHIELD
on the following substrates: steel, aluminum, copper, and brass
panels. The following test results were determined.
PERFORMANCE
- HARDNESS -
Exceeds pencil harness test of 6H
- IMPACT RESISTANCE
- ASTM Standard D2749 with Gardener Variable Impact Tester with
16 mm diameter ball. Exceeds 1.8J and 180 inch pounds reverse
and direct.
- FLEXIBILITY
|
